Home / Products / Quick Rescue Hoists
Image of the Quick Rescue Hoist
Image of a Quick Retrieval Hoist Side View
Pelsue Quick Rescue Hoist Set Up
Pelsue Quick Rescue Hoist Set Up
Pelsue Quick Rescue Hoist Drum
Pelsue Quick Rescue Hoist
Pelsue Quick Rescue Hoist
Pelsue Quick Rescue Hoist
Pelsue Quick Rescue Hoist
Two workers rehearse a confined space rescue using the Pelsue LifeGuard

Quick Rescue Hoists

Fall Protection

When you need to set up a rescue operation, seconds count. That’s why Pelsue designed the Quick Rescue Hoist. 

Built with the exact same specifications as our trusted Personnel Hoist, the key innovation of the Quick Rescue Hoist is that the line is not permanently affixed to the hoist drum. When combined with the Pelsue Rescue Pole, this allows your rescue team to clip the fallen or endangered worker to the line, even from outside a confined space. From there, you can run the line over the pulley and attach it to the hoist for retrieval.  

For emergency rescue when a worker is not already hooked in to hoist or SRL, the Pelsue Quick Rescue Hoist is the ideal solution.

Rated for up to 310 pounds. 

Meets or exceeds all applicable OSHA and ANSI standards. 

read more

Choose Model

Choose model then select accessories to include them into your quote

PHQR

No rope, hoist only

Add to Quote
PHQRR

Reverse winding, no rope, hoist only

Add to Quote
PHQR-T45

45’ Technora® rope and ANSI Z359 swivel snap hook

Add to Quote
PHQRR-T45

Reverse winding with 45’ Technora® rope and ANSI Z359 swivel snap hook

Add to Quote
PHQR-T70

70’ Technora® rope and ANSI Z359 swivel snap hook

Add to Quote
PHQRR-T70

Reverse winding with 70’ Technora® rope and ANSI Z359 swivel snap hook

Add to Quote
PHQR-X45

45’ Technora® rope and wichard hook

Add to Quote
PHQRR-X45

Reverse winding with 45’ Technora® rope and wichard hook

Add to Quote
Finalize QuoteView Accessories

 

To see how to use the Quick Rescue Hoist with the Pelsue Rescue Pole, view this demonstraition.

FEATURES:
  • Rated to raise and lower personnel loads of up to 310 pounds
  • Features a 5.5:1 gear ratio single speed drive and a retrieval rate of 23 feet per minute
  • Continuous braking drive to prevent freewheeling. Ensures safe rescue with a secondary “Overspeed” brake and a double pawls on the friction brake. Brake pads are low-wear and capable of withstanding high temperatures. 
  • Trouble-free continuous use from anti-friction drive bearings
  • Tensioner pad prevents loosening of cable lays
  • Slip clutch drive prevents back-winding of cable drum
  • Reduced susceptibility to corrosion in harsh environments as a result of zinc-plated and anodized aluminum components
  • Removable drive handle with speeder knob and gear teeth cover make for easy, quick, and safe setup
  • Brackets and pins included for quick mounting
  • Soft carrying case included
  • Available with either stainless steel or Technora® rope in varying lengths

360° Spin

ModelDescriptionWeight
PHQRNo rope, hoist only22 lbs.
PHQRRReverse winding, no rope22 lbs.
PHQR-T4545' Technora® rope and ANSI Z359 swivel snap hook22 lbs.
PHQRR-T45Reverse winding, 45' "Technora" rope and swivel snap hook22 lbs.
PHQR-X4545’ Technora® rope and Wichard hook22 lbs.
PHQRR-X45Reverse winding, 45' Technora® rope and Wichard hook22 lbs.
PHQR-T7070' Technora® rope and ANSI Z359 swivel snap hook22 lbs.
PHQRR-T70Reverse winding, 70' Technora® rope and ANSI Z359 swivel snap hook22 lbs.
Quick Rescue Hoist Manual

Download
Quick Rescue Hoist Specifications

Download
Quick Rescue Hoist Accessories
Image of a Hoist Carrying Case

BGW3

Carrying case which fits all hoists and SRLs

Rope Assembly: 501082-S07

Rope assembly - 3/16” Technora® Synthetic, 70’ long, ANSI Z359 swivel snap hook

Rope Assembly: 501082-W45

Rope assembly - 3/16” Technora® x 45’ long, eye each end, wichard hook

Rope Assembly: 501082-S04

Rope assembly - 3/16” Technora® Synthetic, 45’ long, ANSI Z359 swivel snap hook

Image of the Standard Quick-Connect Bracket for the Tripod

MB-TL1 Quick-Connect Bracket

Standard quick-connect bracket kit, to connect Personnel Hoists to Tripod (includes MB-PF1 & MA-PT1)

Image of the Hoist adapter MA-PT1

MA-PT1 Hoist Adapter

Hoist adapter to use in conjunction with MB-PF1 to connect Personnel hoists to Tripod

Image of the Standard Quick-Connect Bracket MB-PF1

MB-PF1 Quick-Connect Bracket

Standard quick-connect bracket for Personnel Hoists, for the LifeGuard and Davit System

Got everything you're interested in?   Finalize Quote

Related Products