End Line Repair Kit
Designed to repair damage at the end of the rod. Includes: instructions, adhesive, sand paper, and both the swivel as well as the solid rod end.
-----------------------------------------------------
In-Line Repair Kit
Designed to repair damage in-line on the rod. Includes: instructions, adhesive, sand paper, and in-line splice.
-----------------------------------------------------
Pulling Eye
Eye is used to tie off winch line, mule tape, or electrical conductors. Also utilized when shackle is required.
-----------------------------------------------------
End-Fitting Swivel
Utilized on leading end of the rod, the swivel end fitting allows line being pulled in, to twist and unwind.
-----------------------------------------------------
End-Fitting Solid
Utilized on rod attached to spool. Provides greater side loading capacity when rod is being reeled off.
-----------------------------------------------------
Union Coupling
For joining two rodding units together outside the duct. Requires each rodder to be equipped with a swivel coupling.
-----------------------------------------------------
Roller Guide
Prevents end hang ups. Guides the rod over bumps, offsets, and around corners.
-----------------------------------------------------
Shackle
Combines with pulling eye, for use when the winch line has a closed loop eye. Also used to connect to another rod with a shackle.
-----------------------------------------------------
Basket Combination
For joining two rods together inside the duct. Minimum duct diameter requirement 4 inches.